- New software specially designed for model cars and boats, but also suitable for model aircraft. - GM-Genius 85 and GM-Genius 100: splashproof case (sensorless operation only) - New special brake software provides several different braking characteristics - Automatic detection of brushed + brushless motors - Automatic detection of motors with Hall sensors - Unprecedented standard of control andstart-up characteristics with sensorless brushless motors - Ideal for competition use >= 5 min. - Optimised heat-sink for improved cooling (supplementary water-cooling possible with GM-GENIUS 50, 85, 90) - Four drive programs, simple to set: Modes 1 - 3 with forward / neutral / brake mode for competition use Mode 1: for normal track conditions, with standard NiMH low-voltage power-down and active special brake software Mode 2: for high-grip track conditions, for maximum acceleration and braking, with lower NiMH low-voltage power-down. Mode 3: for slippery track conditions, with LiPo low-voltage power-down (optimised for four cells) Mode 4: forward / neutral / brake / reverse, with standard NiMH low-voltage power-down - All supplementary functions can also easily be programmed individually using the IDA programming system with Programmer, GMVIS-Commander(V2005) or PC (Windows 2000 or XP) - Programmable supplementary functions such as automatic brake, maximum brake, maximum reverse speed, ABS, speed limiting, soft-start, minimum brake, full brake, automatic throttle, power curve, motor timing, current limiting, start-up current limiting, turbo and different braking characteristics.
Specifications
Operating voltage range: 7.2 ... 14.8 V(19.2 V*) Cell count, NiCd, NiMH: 6 - 12 (16*) Cell count, LiPo, LiIo: 2 - 4 (5*) Continuous current (brushless motors): 40 A Max. motor current (10 s.): 80 A Temperature cut-off: approx. 120° C EMF brake: programmable Reverse: programmable Soft-start: programmable Low-voltage power-down: yes Power-on pulse suppression: yes Pulse frequency: 8 kHz BEC receiver power supply approx. 5.5 V / 4 A peak Max. BEC dissipated power at 20° C: 2.5 W OPTO: optional Dimensions excl. capacitors approx. 50 x 27 x 10 mm Dimensions incl. capacitors approx. 70 x 27 x 13 mm Weight excl. cables approx. 18 g Weight incl. cables approx. 45 g Connector: G3.5 *with opto-coupler, Order No. 2894.3; separate four-cell receiver battery required
